https://www.phoenixcontact.com/us/products/2902028 07/07/2015???page? 1 ?/? 6 signal conditioner?-?mini mcr-2-uni-ui-uiro-pt?-?2902028 please be informed that the data shown in this pdf document is generated from our online catalog. please find the complete data in the user's documentation. our general terms of use for downloads are valid (http://phoenixcontact.com/download) universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. configurable via dip switch or software. push-in connection technology, standard configuration. product description configurable, freely adjustable 4-way signal conditioner with switching output and plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard signals. current signals between 0?ma ... 24?ma and voltage signals between 0?v ... 12?v can be processed on the input side. signals between 0?ma ... 21?ma and 0?v ... 10.5?v are possible on the output side. the minimum measuring span is 1?ma and 0.5?v. full accuracy is maintained with a measuring span greater than 10?ma and 5?v. you can configure the device using one of the free software solutions. default settings can also be made directly on the device by simply using the dip switches (see configuration table). the measuring transducer supports fault monitoring and nfc communication. ? ? ? ? ? key commercial data packing unit 1 pc weight per piece (excluding packing) 100.0 grm custom tariff number 85437090 country of origin germany technical data note utilization restriction emc: class a product, see manufacturer's declaration in the download area dimensions width 6.2 mm height 110.5 mm depth 120.5 mm ambient conditions ambient temperature (operation) -40 c ... 70 c passive in out 5 6 zone 2 4-wire u s 1 2 sensor / field plc / dcs out u, i+ out u, iC pwr+ pwrC + + + C C C C + fm 1 5 2 3 7 4 8 out u, iC pwrC in u, i+ in u, iC roC out u, i+ ti+ tiC pwr+ ro+ 6 s-port active out in power u,i u,i fm
https://www.phoenixcontact.com/us/products/2902028 07/07/2015???page? 2 ?/? 6 signal conditioner?-?mini mcr-2-uni-ui-uiro-pt?-?2902028 technical data ambient conditions ambient temperature (storage/transport) -40 c ... 85 c degree of protection ip20 input data number of inputs 1 configurable/programmable yes voltage input signal 0 v ... 10 v (via dip switch) 2 v ... 10 v (via dip switch) 0 v ... 5 v (via dip switch) 1 v ... 5 v (via dip switch) 10 v ... 0 v (via dip switch) 10 v ... 2 v (via dip switch) 5 v ... 0 v (via dip switch) 5 v ... 1 v (via dip switch) 0 v ... 12 v (can be set via software) current input signal 0 ma ... 20 ma (via dip switch) 4 ma ... 20 ma (via dip switch) 0 ma ... 10 ma (via dip switch) 2 ma ... 10 ma (via dip switch) 20 ma ... 0 ma (via dip switch) 20 ma ... 4 ma (via dip switch) 10 ma ... 0 ma (via dip switch) 10 ma ... 2 ma (via dip switch) 0 ma ... 24 ma (can be set via software) max. input voltage 12 v max. input current 24 ma input resistance of voltage input > 120 k input resistance current input approx. 50 output data number of inputs 1 configurable/programmable yes voltage output signal 0 v ... 10 v (via dip switch) 2 v ... 10 v (via dip switch) 0 v ... 5 v (via dip switch) 1 v ... 5 v (via dip switch) 0 v ... 10.5 v (can be set via software) current output signal 0 ma ... 20 ma (via dip switch) passive in out 5 6 zone 2 4-wire u s 1 2 sensor / field plc / dcs out u, i+ out u, iC pwr+ pwrC + + + C C C C + fm 1 5 2 3 7 4 8 out u, iC pwrC in u, i+ in u, iC roC out u, i+ ti+ tiC pwr+ ro+ 6 s-port active out in power u,i u,i fm
https://www.phoenixcontact.com/us/products/2902028 07/07/2015???page? 3 ?/? 6 signal conditioner?-?mini mcr-2-uni-ui-uiro-pt?-?2902028 technical data output data 4 ma ... 20 ma (via dip switch) 0 ma ... 10 ma (via dip switch) 2 ma ... 10 ma (via dip switch) 0 ma ... 21 ma (can be set via software) max. output voltage approx. 12.3 v max. output current 24.6 ma load/output load voltage output 10 k load/output load current output 600 (at 20 ma) switching output output name switching output number of outputs 1 contact type 1 n/o contact maximum switching voltage 30 v dc power supply nominal supply voltage 24 v dc supply voltage range 9.6 v dc ... 30 v dc (the din rail bus connector (me 6,2 tbus-2 1,5/5- st-3,81 gn, order no. 2869728) can be used to bridge the supply voltage. it can be snapped onto a 35 mm din rail according to en?60715)) typical current consumption 32 ma (24 v dc) 63 ma (12 v dc) power consumption 1 w (at i out = 20 ma, 9.6 v dc, 600 load) connection data connection method push-in connection single conductor/terminal point, solid, with ferrule, min. 0.14 mm2 single conductor/terminal point, solid, with ferrule, max. 2.5 mm2 single conductor/terminal point, solid, without ferrule, min. 0.14 mm2 single conductor/terminal point, solid, without ferrule, max. 2.5 mm2 conductor cross section flexible min. 0.14 mm2 conductor cross section flexible max. 2.5 mm2 min. awg conductor cross section, flexible 24 max. awg conductor cross section, flexible 12 stripping length 10 mm general maximum transmission error 0.1 % (of final value) maximum temperature coefficient 0.01 %/k step response (10-90%) approx. 140 ms (15 hz sample rate) passive in out 5 6 zone 2 4-wire u s 1 2 sensor / field plc / dcs out u, i+ out u, iC pwr+ pwrC + + + C C C C + fm 1 5 2 3 7 4 8 out u, iC pwrC in u, i+ in u, iC roC out u, i+ ti+ tiC pwr+ ro+ 6 s-port active out in power u,i u,i fm
https://www.phoenixcontact.com/us/products/2902028 07/07/2015???page? 4 ?/? 6 signal conditioner?-?mini mcr-2-uni-ui-uiro-pt?-?2902028 technical data general approx. 45 ms (60 hz sample rate) approx. 25 ms (240 hz sample rate) status display yellow led (switching output) electrical isolation reinforced insulation in accordance with iec 61010-1 surge voltage category ii pollution degree 2 rated insulation voltage 300 v test voltage, input/output/supply 3 kv (50 hz, 1 min.) electromagnetic compatibility conformance with emc directive 2004/108/ec noise emission en 61000-6-4 noise immunity en 61000-6-2 when being exposed to interference, there may be minimal deviations. color gray housing material pbt mounting position any assembly instructions the t connector can be used to bridge the supply voltage. it can be snapped onto a 35 mm din rail according to en 60715. conformance ce-compliant atex ? ii 3 g ex na iic t4 gc x ul, usa / canada ul 508 listed class i, div. 2, groups a, b, c, d t6 class i, zone 2, group iic t6 gl gl applied for emc data designation electromagnetic rf field standards/regulations en 61000-4-3 typical deviation from the measuring range final value 0.2 % designation fast transients (burst) standards/regulations en 61000-4-4 typical deviation from the measuring range final value 0.1 % designation conducted interferences standards/regulations en 61000-4-6 typical deviation from the measuring range final value 2.8 % passive in out 5 6 zone 2 4-wire u s 1 2 sensor / field plc / dcs out u, i+ out u, iC pwr+ pwrC + + + C C C C + fm 1 5 2 3 7 4 8 out u, iC pwrC in u, i+ in u, iC roC out u, i+ ti+ tiC pwr+ ro+ 6 s-port active out in power u,i u,i fm
https://www.phoenixcontact.com/us/products/2902028 07/07/2015???page? 5 ?/? 6 signal conditioner?-?mini mcr-2-uni-ui-uiro-pt?-?2902028 classifications ecl@ss ecl@ss 4.0 27040702 ecl@ss 4.1 27040702 ecl@ss 5.0 27242213 ecl@ss 5.1 27049002 ecl@ss 6.0 27049002 ecl@ss 7.0 27049002 ecl@ss 8.0 27210121 etim etim 3.0 ec001039 etim 4.0 ec002540 etim 5.0 ec002653 unspsc unspsc 6.01 30211502 unspsc 7.0901 39121004 unspsc 11 39121004 unspsc 12.01 39121004 unspsc 13.2 39121004 approvals approvals approvals ul listed / cul listed / culus listed ex approvals ul listed / cul listed / atex / culus listed approvals submitted approval details passive in out 5 6 zone 2 4-wire u s 1 2 sensor / field plc / dcs out u, i+ out u, iC pwr+ pwrC + + + C C C C + fm 1 5 2 3 7 4 8 out u, iC pwrC in u, i+ in u, iC roC out u, i+ ti+ tiC pwr+ ro+ 6 s-port active out in power u,i u,i fm
https://www.phoenixcontact.com/us/products/2902028 07/07/2015???page? 6 ?/? 6 signal conditioner?-?mini mcr-2-uni-ui-uiro-pt?-?2902028 approvals ul listed? cul listed? culus listed? drawings block diagram pictogram phoenix contact 2015 ? - all rights reserved http://www.phoenixcontact.com passive in out 5 6 zone 2 4-wire u s 1 2 sensor / field plc / dcs out u, i+ out u, iC pwr+ pwrC + + + C C C C + fm 1 5 2 3 7 4 8 out u, iC pwrC in u, i+ in u, iC roC out u, i+ ti+ tiC pwr+ ro+ 6 s-port active out in power u,i u,i fm
|
